Pioneer GM-5400T 760-Watt, 2-Channel Power Amplifier Reviews

Pioneer GM-5400T 760-Watt, 2-Channel Power Amplifier

• Two-channel car amplifier with 760-watt max power capability
• Delivers 125 watts x 2 at 4 ohms, 380 watts x 1 at 4 ohms, or 190 watts x 2 at 2 ohms
• Selectable low-pass filter (80 Hz, 12 dB per octave)
• Preamp- and speaker-level inputs for connecting to most source units
• Bass boost with level control

The Pioneer GM-5400T 760-Watt, 2-Channel Power Amplifier comes with an all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits and Oversized power terminals.A beefy power increase. An all-new design featuring an extruded heatsink with a brushed metallic surface. Speaker level inputs for easy connection to OEM headunits. Oversized power terminals. Bottom line? The 2-channel GM-5400T is a huge value in a small package.

Pioneer GM Series Amplifiers A Solid Foundation Adding an amplifier to your vehicle redefines your in-car experience, and can completely change the way you listen to your favorite music. The Pioneer GM series amplifiers are designed to add loads of much-needed volume, chest-thumping power, and heightened clarity. Solid Value GM series amplifiers provide exceptional value. Get more watts-per-dollar compared to competing brands, and save money to build other components in your system. Bridgeable Operation These bridgeable amplifiers also allow for more power as your needs grow. By combining the power of multiple channels to drive different system configurations, you can take your system to a whole new level of sound.

---

GM-5400T Features 760-Watt Max Power Anybody have a problem with more power? We didn't think so. The GM-5400T packs an impressive wallop despite its small size, with 760-watt max power capability. It can run 125 watts x 2 at 4 ohms, 380 watts x 1 at 4 ohms, or 190 watts x 2 at 2 ohms--whichever best fits your system configuration. Built-In Crossover (80Hz Low-Pass Filter) Built into the GM-5400T is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker. This optimizes your system's efficiency and delivers the best possible sound quality. Speaker Level Inputs The GM-5400T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters. The install goes faster, you save money, and you've got a Pioneer amp in your vehicle. Gain Control What is power without control? To accommodate the varying range of signal levels coming from today's factory and aftermarket radios, all of Pioneer's GM-series amplifiers feature adjustable gain controls. This means that no matter what kind of radio is connected to this amplifier, the appropriate gain control adjustment can be made to ensure loud, clear, distortion-free music. And even if the gain control level is set improperly, Pioneer's Gain Control Caution feature will automatically reduce the amplifier's output until the headunit volume is decreased to acceptable levels. This added layer of protection helps to prevent damage from occurring to the amplifier and the speakers connected to it due to improper gain control adjustments. Bass Boost Selectable 50Hz Bass Boost gives you more control over how your music sounds. It lets you set the optimal bass level for each speaker/sub connected to the GM-5400T, so the tone controls from your headunit can do what they do best. And because this is selectable bass boost, you can set the level at 0dB, 6dB, or 12dB, whichever sounds best to you.

---

GM-5400T Specs

Peak Music Power:	760 Watts
Number of Channels:	2
Load Impedance Capability:	2~8 Ohm (Stereo) 4~8 Ohm (Bridged)
Continuous Power (4 ohm):	125W x 2
Continuous Power (2 ohm):	190W x 2
Continuous Power Bridged (4 ohm):	380W x 1
Frequency Response:	10Hz ~ 50kHz
Total Harmonic Distortion:	<0.03
Signal-to-Noise Ratio:	>95dB
Dimensions:	10-1/2" x2-1/2" x 13-5/8"
Bridgeable:	Yes
Channel # Capability:	2/1
Balanced Isolator Input Circuit:	Yes
RCA Inputs:	2 Channel
Speaker Level Input:	2 Channel
Input Level Control:	Hi-Volt (400mV ~ 6.5v)
Built-in Crossover:	Selectable LPF
Crossover Frequency Range:	80Hz, -12dB/Oct.
Bass Level Control	50Hz, 0/6/9/12dB
Warranty:	1 Year

---

Pioneer Car Audio Systems

Pioneer's Mobile Business Group is known for offering the kind of in-car products that make driving more enjoyable by offering high quality audio and video, seamless connectivity and ease-of-use. Its focus is on the development of new digital technologies including audio video, navigation and satellite radio, while maintaining its strong heritage in products for car audio enthusiasts and sound competitors.

---

What's in the Box
Pioneer GM-5400T Amplifier, Input Harness, Installation Hardware, Owner's Manual

Price: $ 95.99

Pioneer GM-3500T 2-Channel Bridgeable Amplifier

• Amplifiers send a cleaner current to your car speakers. In layman's terms, this means that your stereo gets cleaner sound and frequency, ensuring a higher sound quality overall.
• The GM-3500T packs an impressive wallop despite its small size, with 400-watt max power capability. It can run 60 watts x 2 at 4 ohms, 85 watts x 2 at 2 ohms, or 185 watts x 1 at 4 ohms - whichever best fits your system configuration.
• Built into the GM-3500T is a very smart crossover network. It works like a gateway, routing the big bass signals (80Hz or lower, at -12dB/octave) to the speaker that handles them best, filtering out higher-frequency signals to that speaker.
• The GM-3500T's speaker level inputs allow you to connect your OEM unit (or any unit that doesn't have the typical RCA-type inputs) without having to buy add-on adapters.

Pioneer 2-Channel bridgeable amplifier with 400 watts of power. Has a built-in crossover at 80Hz and RCA and speakers level inputs.

Price: $ 100.00

*Prices may change at any